Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

45NRTH Cobrafist Bar Plugs
$12.00
Replacement bar end plug for 45NRTH Cobrafist pogies
45NRTH Helva
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
No Image
$24.00 - $27.99
- Durable cold forged CNC machined freewheel - 3 pawl engagement for stronger hold with engagement every 12 degrees - New removal notch pattern allows for better frame clearance
All-City Fixed Cog Lockring
$12.00
- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread
All-City Cross Chainring
$40.00 - $45.00
These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible
Avid 20R Brake Pads
$9.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
Avid FR-5 Single Brake Lever
$11.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
Avid Disc Brake Pads (Juicy/BB7/BB5)
$18.00 - $22.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Rim Wrangler 2 Brake Pads (w/cartridge)
$19.99
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
Avid IS Disc Brake Adaptor
$20.00
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
Avid FR-5 Brake Levers
$21.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Avid Post-Mount Disc Brake Adaptor
$24.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
Avid Disc Brake Pads (Elixir)
$25.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid MatchMaker X (Single)
$31.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
Avid BB7 S Road Cable Disc Brake Caliper
$88.00
This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 204 g
Brooks Proofide Saddle Dressing
$11.99
Brooks' Proofide Saddle Dressing shortens the break-in period of a new saddle. It's specially formulated from natural ingredients to preserve and condition the leather, keeping it supple and shower-proof for the life of the saddle.
Brooks Cambium C15 All Weather
$120.00
The Cambium C15 All Weather saddle is made for years of hard riding, in a forward riding position, for more sporty cycling. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
Brooks Cambium C15 All Weather Carved
$120.00
The Cambium C15 All Weather Carved is made for years of hard riding in a forward riding position, and features hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
Brooks Cambium C17 All Weather
$120.00
The Cambium C17 All Weather is made for years of hard riding in an angled riding position, for commuting in the city or travelling the globe. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
Brooks Cambium C17 All Weather Carved
$120.00
The Cambium C17 All Weather Carved is made for years of hard riding in an angled riding position, and features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
Brooks Cambium C19 All Weather Carved
$120.00
The Cambium C19 All Weather Carved is a wider saddle made for an upright riding position. It features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. The updated fiberglass reinforced backplate has loops for a saddle bag or other riding accessories. - Vulcanized natural rubber and nylon top - Steel rails with a reinforced plastic backplate - Length: 275mm - Width: 184mm - Height: 52mm - Weight: 490g
Brooks B17 S Standard
$130.00 - $145.00
Globally renowned and truly timeless, the B17 S Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 S Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. The S models are shorter and wider than a normal B17 and are uniquely suited to women riders. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style and durability.
Brooks B17 Standard
$130.00
Globally renowned and truly timeless, the B17 Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style, comfort, and durability.
Campagnolo Record 9-Speed Chain
$70.00
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Chrome-Nickel-PTFE finish - Designed specifically for use with Campagnolo 8 and 9 speed drivetrains only - Links (links): 114 - Color: Silver - Width: 6.8 mm - Drivetrain Speeds: 9 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 300 grams
Campagnolo Veloce 10-Speed Chain
$76.00
Campagnolo's Veloce 10-Speed chain boasts an anti-friction coating for a smooth, quiet drivetrain and outstanding durability. It's the perfect match for your Campy-endowed road machine.
Campagnolo Chorus 11-Speed Chain
$80.00
For smooth shifting and a quiet drivetrain, pick up Campagnolo's Chorus 11-speed chain. It's unidirectional for unparalleled function and features lightweight hollow pins as well as an anti-friction treatment for shifting perfection. It also boasts excellent wear and flex resistance.
Cane Creek Crown Race
$9.00 - $13.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction
Cane Creek 40-Series Headset Top Cover
$14.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm
Cane Creek 40 IS41 Headset Top
$36.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g
Cane Creek 110 IS47 Headset Bottom
$39.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS47/33/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 47.0mm • Crown Race Seat Dia.: 33mm • Crown Race Type: Aluminum, Seal • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Weight: 38.47g
Cane Creek 40 Series ZeroStack Bottom
$42.00
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
Cane Creek 10 EC34 Headset
$44.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC34/28.6/H16/K|EC34/30 /H12/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 33.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 88.29g
Cane Creek 10 Series Internal Cup ZeroStack Headset
$44.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 10 Series has light, tough and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
Cane Creek 40 IS41/IS52 Tapered Headset
$60.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 87g
Cane Creek 40 Series External Cup Headset
$62.00 - $90.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Cane Creek 110 ZS49 Headset Bottom
$75.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: ZS49/30/H4/x • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 4mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 50.91g
Cane Creek 110 Series Integrated Headset (Italian)
$120.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
Cannondale Synapse Bar Tape
$19.99 - $21.00
Add a little comfort and style to your ride with Cannondale's Synapse Bar Tape. It features a soft and durable suede finish with a gel backing for your riding enjoyment.
Cannondale Superlight Microfiber Premium Handlebar Tape
$25.00
Cannondale's Superlight Microfiber Premium Bar Tape is thin and tacky, offering exceptional feedback from the bar for uncompromising performance. This tape is perforated for breathability, and its grippy surface allows for better control, even when moist or wet. Plus, it's durable and easy to clean, so it holds up under the most demanding conditions.
Cannondale Pro Grip Premium Handlebar Tape
$40.00
Cannondale's Pro Grip Premium Bar Tape delivers a durable and tacky surface for unbelievable grip in all conditions. The polymer-coated EVA foam feels great with or without gloves, and you'll love the gel backing for extra vibration dampening to help reduce hand fatigue.
Cannondale 1.5-inch Stem
$59.99 - $65.00
Cannondale's 1.5-inch Stem comes in plenty of options to fine-tune the fit on your bike. This stem works with larger 1.5-inch steerers, frequently found on Cannondale's front-suspension bikes. Using Cannondale's One-Piece-Integration process, it's made of a single piece of durable, lightweight 2024 aluminum.
Cannondale C2 Seatpost
$90.00
- Carbon fiber shaft provides superior road vibration damping for improved-comfort - Low-profile twin-bolt head offers infinite seat angle adjustment, available in 15mm and zero offset to help riders fine tune bike fit - Extended rail clamp reduces load to the saddle rails and offers rock solid saddle installation and power transfer
Crank Brothers Shoe Shields
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Crank Brothers Pedal Refresh Kit
$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: - enduro catridge bearings - igus LL-glide bearings - double seal system (internal and external seals) - hex alloy end caps - o-rings - nuts - sleeve bushings - bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Crank Brothers Candy 1
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
Crank Brothers Double Shot 1
$59.99
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair
Crank Brothers Eggbeater 1
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
Crank Brothers Candy 2
$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all — cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged scm 435 chromoly steel Body material: 6061-T6 aluminum Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 355g per pair Warranty: 5 years
Crank Brothers Eggbeater 2
$99.99
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.
Crank Brothers Eggbeater 3
$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years
Crank Brothers Mallet 3
$135.00
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.
DMR STS Chain Tensioner
$28.00
- Simple tension seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame - Perfect for street or dirt jump where simplicity and durability is key - Stainless steel arm mounts to derailleur hanger and dropout - Loosen bolt and swing down and back to adjust chain tension - High density polyurethane pulley with sealed cartridge bearings
DT Swiss Centerlock To 6-Bolt Adapter
$25.00
- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g
Deda Elementi Logo Tape
$12.99 - $19.99
- Special microcellular structured tape material is waterproof and conforms to bar shapes - High elastic modulus provides vibration-damping and comfort - Embossed logo throughout tape length and self-adhesive backing - Black plastic end plugs and finishing strips
Dimension Anodized Bolt M5x.8 16mm
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
Dimension Junior Grips
$8.99
Dimension Junior grips—little grips for little mitts. - Fits 22.2mm handlebars - Flange: No - Grip Shift Specific: No - Length: 100mm - Lock On: No - Shape: Round - Weight: 58g
Dimension Cork Grips
$9.99 - $16.45
Dimension Cork Grips are the classic style grip for cruisers or mountain bikes. - Flange: Yes - Grip Shift Specific: No - Length: 125mm - Lock On: No - Shape: Round - Weight: 26g
Dimension Cruiser/BMX Bottom Bracket
$9.99
Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi
Dimension Junior Pedals
$9.99
Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)
Page 1 of 11 Next page