Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

Wheels Manufacturing Inc. Open Bore Adapters
$7.50
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
Wheels Manufacturing Inc. Sealed Bearing Extractor 17mm
$22.00
Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287
Wheels Manufacturing Inc. Sealed Bearing Extractor Set
$240.00
This Wheels Manufacturing Sealed Bearing Extractor Set removes sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch. - 12-piece set (Individual replacement extractors and parts are also available) - Made in the USA Set includes: - (1) Clear Plastic storage container - (1) 8mm ID Bearing Extractor - (1) 9mm ID Bearing Extractor - (1) 9.5mm ID Bearing Extractor - (1) 10mm ID Bearing Extractor - (1) 12mm ID Bearing Extractor - (1) 15mm ID Bearing Extractor - (1) 17mm ID Bearing Extractor - (1) 20mm ID Bearing Extractor - (1) 22mm ID Bearing Extractor - (1) 24mm ID Bearing Extractor - (1) 25mm ID Bearing Extractor - (1) 30mm ID Bearing Extractor - (1) Spare parts bag containing bolt sets for extractors
Surly Singleator Wrench
$8.00
The Surly Singleator Wrench is made from leftover stainless steel and serves two important functions: its 18mm wrench is perfect for adjusting the tension on your Singleator, and it opens bottles. Seriously. What a great way to reduce, reuse and recycle.
Sunlite 5/6mm Hex Wrench
$2.59
• 5/6mm hex wrenches
Stan's NoTubes 2oz Tire Sealant Injector
$11.99
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
SRAM Bleeding Edge Tool For Guide And Level Brakes
$24.00
SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit
SRAM Hydraulic Hose Cutter, Hand-held
$25.00
SRAM's Hydraulic Hose Cutter is a hand-held cutter for easily, quickly and precisely cutting and sizing your non-braided hydraulic lines.
SRAM Pro Bleed Kit
$76.00
- Improved sealing and durability - New rotating metal hose fittings - High-volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit
RockShox Schrader Valve Removal Tool
$6.00
RockShox's Schrader Valve Removal Tool is an essential tool for working on suspension components. This shop quality tool makes removing Schrader valve cores easy with its long, comfortable handle.
RockShox Air Valve Adapter Tool
$9.00
• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch
RockShox Air Can Service Kit
$17.00 - $23.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
RockShox Fork Service Kit
$17.00 - $40.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox Rear Shock BushingTool
$18.00
• Removes and installs all RockShox 1/2mm rear shock eyelet bushings and mounting hardware
Problem Solvers 90 Degree Presta Valve Inflator for disc wheels
$16.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
ProGold Xtreme Chain Lube
$14.99 - $33.00
- Xtreme chain lube is formulated for long-distance and extreme off-road conditions - MFR bonds to metal surfaces and resists build-Up and tackiness, in addition to shedding water
Pedro's Tire Levers
$5.00 - $120.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Pedro's Pro Chain Tool Pins
$7.00
Replacement pins for Pedro's Pro Chain Tool, Pro Chain Tool 2.0, and Apprentice Chain Tool - Includes two replacement pins
Pedro's BB Socket Holder
$13.00
If you have even battled with an over-tightened Shimano and ISIS Drive splined bottom bracket cup, you know why Pedro's created the BB Socket Holder. Though these types of bottom brackets proved themselves as the standard for many years and continue to be found on many bikes, the tendency for these shallow splines to slip during removal or installation has resulted in more than a few expletives, high frustration levels, and worst of all, injuries. Pedro's BB Socket Holder provides a simple, shop quality tool that solves this problem. Backed by Pedro's lifetime warranty. - Holds socket tool to BB axle to eliminate slippage during removal and installation - Works with square taper and splined axles with M8 or M15 internal spindle thread - Made from heat-treated tool steel for the ultimate in strength and long-lasting performance - Use with Pedro's Splined Bottom Bracket Socket. Compatible with Pedro's Pro Socket Handle.
Pedro's Cone Wrench
$13.00
Professional quality heat-treated steel with hand-saving no-slip plastic grip and ergonomic design for maximum leverage and comfort. - Precision cut for an exact fit with no slippage - Lifetime warranty on all Pedro's tools
Pedro's L Hex Wrench Set
$35.00
The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder
Pedro's Equalizer Pedal Wrench II
$36.00
- New design with dual 15mm openings and 24mm socket driver. - Features extra long 350mm length and dice grip handle. - Designed to stand up to the harsh conditions of professional use. - Improved ergonomics makes pedal removal easier. A quality pedal wrench is worth its weight in gold. The new and improved Pedro's Equalizer Pedal Wrench II makes quick work of even the toughest pedals and now doubles as a socket driver wrench for use with Pedro's professional socket tools. Features include an extra long, 350mm length, tubular handle with dice grip for control and comfort, heat-treated chrome-moly steel construction for the ultimate strength and lasting performance, new 24mm socket driver, and new dual precision cut 15mm wrench openings positioned at 30 and 75 degree offsets for optimal mechanical advantage and wrench positioning. Backed by Pedro's lifetime warranty.
Pedro's Master T-Handle Set
$135.00
Hex and torx wrenches are the lifeblood of the modern bicycle mechanic. Drawing upon years working closely with the finest mechanics in the world, true masters of their craft, Pedro's developed The Master T-Handle Set to meet the rigor and versatility required by the best. The set, housed in a custom storage pouch, includes hex and torx sizes used day in and day out; 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, and T10, T25, and T30 torx wrenches. Each wrench is crafted from premium 6150 alloy tool steel and features three hardened precision tips ready to tackle any task. A three-position sliding t-handle design and extra-long extended leg offer the ultimate combination of speed, ergonomics, leverage, and versatility. - Each wrench features premium tool steel and three hardened precision tips ready to tackle any task - Three-position sliding t-handle design and extra-long extended leg offer the ultimate in speed, ergonomics, leverage, and versatility - Set of 10 wrenches includes: 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, T10, T25, and T30 torx wrenches, and custom storage pouch
Park Tool Tire Lever Set
$2.99
Park's Tire Lever Set is made of high-strength nylon for long life and to prevent tube or rim damage. The levers make tire removal easy and won't pinch tubes. Everyone should have a set of these reliable levers.
Park Tool Tire Lever Set (Set of 3)
$3.49
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
Park Tool Chainring Nut Wrench
$4.49
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Park Tool Gear Clean Brush
$4.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool Shop Screwdriver
$4.95 - $5.49
Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.
Park Tool Double-Ended Cone Wrench
$5.95 - $5.99
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Park Tool Hex Wrench (8mm)
$5.95
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Page 1 of 5 Next page